Garden Landscaping
Garden landscaping brings together every stone category: ground cover for beds and borders, gravel for paths, …
Published · By Gardenstone Editorial Team · Educational article from the SWME TRADE team
White pebbles are bought in bulk in three physical formats: loose-tipped loads, one-tonne jumbo bags and 20–25 kg retail bags. A 20 ft container carries 24–27 loose tonnes, which equals 24–27 jumbo bags or roughly 1,200–1,350 twenty-kilogram bags. Because white shows every speck of dust and rust that other colours hide, a bulk order also needs a cleaner chain: washed stone, lined bags and a dedicated container.
This guide converts the bulk formats into per-bag and per-square-metre numbers you can put on a purchase order, explains why white costs more to keep clean, and lists the seven order lines that separate a repeatable bulk supply from a one-off container that arrives grey.
Bulk buyers choose between three pack-outs. Loose-in-container is the cheapest: stone is washed, drained and tipped straight into a lined 20 ft box, and it suits projects that decant on site. Jumbo bags (FIBC) hold 1,000–1,200 kg each, stack two-high on pallets and discharge by spout — the standard format for distributors and contractors moving stone by the truckload. Small bags of 20–25 kg, sewn or with handles, serve garden-centre and retail resale, either palletized or loose-stacked in the container.
Whatever the format, the tonne stays the accounting unit. The bag is just the delivery wrapper, and every quote should be reduced to a per-tonne or per-square-metre figure before two suppliers are compared — the section below shows the arithmetic.
The conversion is fixed arithmetic. One tonne is fifty 20 kg bags, forty 25 kg bags, or a single one-tonne jumbo bag. A 20 ft container loaded to 24–27 tonnes therefore holds about 1,200–1,350 twenty-kilogram bags, 960–1,080 twenty-five-kilogram bags, or just 24–27 jumbo bags — the reason freight and handling per tonne drop sharply as bag size grows. At the common 40 mm laying depth, white pebbles need 60–68 kg per square metre, so one 20 kg bag covers roughly 0.25–0.33 m² and one jumbo bag covers 15–17 m².
Per bag pricing converts cleanly too: multiply the bag price by 1,000 and divide by the net kilograms to get the per-tonne equivalent. Retail-bag equivalents typically land 2–4 times above jumbo-bag equivalents once bagging, printing, palletizing and breakage are recovered — which is why project buyers normalise every quote to per tonne or per square metre before comparing.
White is unforgiving. An iron-stained grain, a clay-coated pebble or a rust flake off a dirty container floor disappears in red or black stone but reads as a visible blemish across a white bed. Contamination below 1% by weight is commercially acceptable in most coloured gravel; in white, the same rate shows up in photographs. That is why bulk white pebbles should be ordered washed, with fines under 1%, screened on a dedicated line — shared screens carry dust from the previous coloured run.
The container itself is part of the specification. Order a dry, sweep-clean box, fit a liner or kraft paper over the floor and walls, and never co-load white pebbles with dyed, dark or oily cargo — colour transfer through bag fabric is a documented complaint in the trade. Reused or second-grade bags with printing from other products should be refused; a stained bag face is the first thing a retail customer sees.
A 20 ft container fills on weight before it looks full: 24–27 loose tonnes. In jumbo bags the payload stays near the full 24–27 t; palletized small bags cost 10–15% of the payload, landing at roughly 21–24 t per box. At 40 mm depth, where one tonne covers 15–17 m², a full container paves 360–450 m² — enough for a resort pool surround or a housing-development frontage in one shipment.
White adds one twist to container planning. The whitest grade on any quarry scale is a low-yield product: achieving a consistent L* of 90+ can require a 25–50 tonne production run before screening losses. If a container is needed urgently, splitting the load across two or three adjacent size grades costs no extra ocean freight — the box is weight-limited, not volume-limited — and lifts the total tonnage available at the top whiteness level.
Packaging is a real cost line, not a free choice. Jumbo bags add the least — typically 5–8% of the ex-works tonne price. Sewn 25 kg bags sit in the middle, and printed retail bags with handles are the most expensive, pushing 8–15% of the tonne value once artwork, film and palletizing are counted. The decision rule is simple: if you resell in bags, let the factory bag it and recover the cost at retail margin; if stone goes straight onto a project, jumbo bags or loose packing give the lowest landed cost per tonne.
Moisture is the hidden packaging factor. Washed stone that ships wet carries 3–6% water, which on a 25-tonne container is 0.75–1.5 tonnes of freight paid for nothing — and in a lined bag that moisture can wick and leave tide marks on the stone face. Specify washed-and-drained or dried stone with net weight declared on a dry basis, and the per-bag weights your retail customers print on their shelf labels will reconcile with the weighbridge.
Put the whole clean-chain on paper so the supplier prices it rather than guesses it. Seven lines cover a bulk white order: the rock type with a carbonate cap; the size grade with explicit undersize and oversize limits; a whiteness floor (for example L* 88 or better) with a yellowness (b*) ceiling, both measured on wet stone against a sealed sample; fines under 1%; no dye, coating, wax or whitening agents; the packaging format with net weight tolerance of ±2% and weighbridge records per bag lot; and the container condition — lined, dry, dedicated to white.
On arrival, cut open three random bags per container, wet a handful and compare it in daylight against the sealed sample kept from the production run. Photograph each check next to the sample. That ten-minute routine converts the whiteness clause from a promise into a record, and it is the evidence you need if a top-up order must match next season. Our white pebbles page lists the current size grades and bulk packing options to check any quote line against.
One tonne equals fifty 20 kg bags or forty 25 kg bags. A 20 ft container loaded with 24–27 tonnes therefore holds about 1,200–1,350 twenty-kilogram bags, or just 24–27 one-tonne jumbo bags.
A one-tonne jumbo bag covers 15–17 m² at a 40 mm finished depth and 12–13 m² at 50 mm, based on a loose bulk density of 1.5–1.7 tonnes per cubic metre. A single 20 kg bag covers roughly 0.25–0.33 m² at 40 mm.
Jumbo bags are cheaper per tonne: small-bag filling, printing and palletizing add 8–15% to the ex-works price, and palletized loading loses another 10–15% of container payload. Most buyers switch from small bags to bulk once the project area passes roughly 50 m².
Order washed stone with fines under 1%, pack it in lined jumbo bags, load it into a dry sweep-clean container with no dyed or dark cargo in the same box, and on arrival cut open three random bags and compare wet stone in daylight against the sealed production sample.
“Trade Map provides comprehensive global trade data for over 230 economies, with monthly, quarterly and yearly updates using official reported data and mirror data techniques.”
ITC Trade Map, trademap.org — official page
Garden landscaping brings together every stone category: ground cover for beds and borders, gravel for paths, …
Pool surroundings combine hard performance requirements with a resort aesthetic: stone around pools must toler…
Hotel and resort landscapes are commercial projects with residential finish quality: large areas, premium appe…
Everflorae — Artificial Plants & Trees
From the same supplier group, Everflorae supplies UV-stable artificial trees, palms and green walls that pair with stone — one source for hotels, resorts, malls and Japanese gardens.
Send your product, specification and destination — our sales team will prepare a quotation.