Dalian, Liaoning, China · Supplier / Exporter
Large landscape boulders set into a modern garden terrace with stone-edged gravel pathways, showing wall-face stone in a finished project

SWME TRADE · Blog

What Landscape Stone Should You Use for Retaining Walls?

For low retaining walls up to about 600 mm, use graded landscape boulders of 100–300 mm laid as a gravity wall on compacted base, with free-draining angular gravel backfill behind the mass; taller walls need engineered gabion baskets or structural block with 150–300 mm of drainage stone. A 10 m² boulder face at 500 mm height consumes roughly 4–6 tonnes of wall stone plus 2–3 tonnes of backfill gravel.

Published · By · Educational article from the SWME TRADE team

What Landscape Stone Should You Use for Retaining Walls?

For a gravity retaining wall up to about 600 mm high, use angular landscape boulders in a 100–300 mm grading — weathered granite, sandstone or limestone blocks with flat bearing faces — laid in staggered courses on a compacted 100–150 mm base, with free-draining angular gravel backfill filling the zone behind the stone mass. Expect a 10 m² face at 500 mm height to consume roughly 4–6 tonnes of wall stone plus 2–3 tonnes of backfill gravel. Above 600–800 mm, the stone becomes the facing and the engineering moves to gabion baskets, structural blocks or concrete, all still clad or filled with the same landscape stone.

The distinction matters when you buy. Wall-face stone is judged on shape, colour and stacking efficiency; backfill stone is judged purely on gradation and permeability, and ordering one specification to do both jobs is the most common — and most expensive — mistake on a retaining-wall import. The sections below separate the two, cover garden steps from the same order, and set out the specification lines a wholesaler should put on the contract.

How Much Landscape Stone Does a Retaining Wall Need per Square Metre?

Tonnage follows face area and wall height. A boulder wall of 100–300 mm stone at 300 mm height takes roughly 0.30–0.35 tonnes per square metre of face; at 500 mm height, 0.45–0.55 t/m²; at 800 mm, 0.75–0.9 t/m². Loose bulk density of 1.5–1.6 t/m³ drives the arithmetic, and stacking efficiency — how well irregular boulders key against each other — moves the real figure by ±15%, so measure the delivered stockpile, not the invoice, on the first shipment.

Backfill multiplies the number. Behind any retaining mass you want 150–300 mm of free-draining angular gravel — a 20–40 mm crushed grade is standard — extending from the wall base up to 100–200 mm below finished grade. For the same 10 m² × 500 mm wall that is another 2–3 tonnes. At container scale, one 24–27 tonne load covers roughly 45–60 m² of finished boulder face at 500 mm including its backfill, which is the conversion most landscape contractors quote from first.

Can the Same Landscape Stone Be Used for Garden Steps?

Yes, and specifying both uses on one order is where the savings sit. Garden steps cut from 100–150 mm thick landscape stone slabs need a tread depth of 300–450 mm and a riser of 100–180 mm; large-format boulders from the same quarry face work as flanking wall stones and step blocks together, keeping colour and weathering identical across the staircase. Bulk contractors typically order step slabs by the piece — 0.9–1.2 m long — while wall stone moves by the tonne, so the purchase order should carry both units and let the supplier allocate from one consistent lot.

Two sizing rules keep steps safe. The stone must be thick enough not to rock — under 100 mm, thin slabs crack under point loads from feet or a snow shovel — and the bedding must be compacted crushed gravel, not loose pebble, so each tread sits dead level. If the design calls for gravel treads between timber or stone risers instead, fill them with a 14–20 mm angular gravel rather than rounded pebble: angular stone interlocks underfoot, rounded stone rolls.

Should Wall-Face Stone and Drainage Backfill Be Ordered Separately?

Always. The face stone is an appearance product: buyers select it on colour consistency, flat faces and a grading band wide enough to stack — 100–300 mm with no more than 10% under 100 mm. The backfill is a performance product: a 20–40 mm crushed angular gravel with fines under 5%, chosen so water drops through it fast. Blending the two into a single 'retaining wall stone' lot gives you a face that looks patchy and a backfill that clogs, because the fines that make a face look dense are exactly what kills drainage.

Ordering them separately also protects the drainage layer itself. Every retaining wall above 300 mm should carry a perforated drain pipe at the base of the backfill zone, wrapped in geotextile so the angular gravel around it stays clean. When the backfill arrives pre-contaminated with fines — a frequent failure in mixed bulk lots — hydrostatic pressure builds behind the wall, and by the second wet season the face bulges. A jar test on the backfill lot before loading, the same 200 g in water used for decorative stone, costs nothing and catches it.

What Should a Bulk Retaining-Wall Order Specify?

Four lines cover the wall stone. Geology and finish — natural weathered boulder, no painted or resin-coated material, with a sealed wet-and-dry colour reference. Grading — 100–300 mm for the face with a stated tolerance, and a separate 300–500 mm lot if the design mixes large feature boulders into the course. Shape — flat-bearing-face stones above 70% of the lot, because round cobbles stack like marbles and a round-stone wall creeps outward. Packing — 1,000–1,200 kg jumbo bags for the face stone so each bag is one course on site, and loose bulk or jumbo for the backfill.

Then two lines cover the rest. Backfill — 20–40 mm crushed angular gravel, fines under 5%, no clay. Steps — slab length 0.9–1.2 m, thickness 100–150 mm, tread sawn or naturally flat, priced per piece with a piece count per crate. Finally agree the loading protocol: weighbridge tickets within ±2% of declared tonnage, photographs of each jumbo bag against the colour reference before the container closes, and a 5 kg sample of the backfill retained by both sides until the shipment lands.

How Do You Keep Colour and Grading Consistent Across a Multi-Container Project?

Retaining walls are the most colour-sensitive product in landscape stone, because a wall is read as one continuous object from 20 metres away while a ground cover is read as texture. Quarries weather in bands, so containers drawn from different faces of the same pit can drift a shade apart. Lock consistency contractually: one quarry face named in the order, one sealed colour reference approved before production, and the first two jumbo bags of every container checked against that reference before loading — the same batch protocol used for linear edging bands, applied to a vertical product.

Sequence delivery so the wall builds from the same containers. A 100 m terraced project that lands 40–60 tonnes will draw three to five containers; stacking the lowest terrace from container one and the upper terraces from container two keeps any single wall face within one lot. Blend sparingly across courses only where the design intends a mixed look. Imported stone sits outdoors for decades — colour drift that hides in a gravel bed becomes a visible band on a wall.

Frequently Asked Questions

What size landscape stone is best for a retaining wall?

For gravity walls up to about 600 mm high, use angular boulders graded 100–300 mm with flat bearing faces, laid in staggered courses on a compacted base. Walls above 600–800 mm need engineered gabion baskets or structural block, with the landscape stone acting as facing or basket fill.

How many tonnes of landscape stone does a retaining wall need?

A boulder wall face at 500 mm height takes roughly 0.45–0.55 tonnes per square metre, plus 0.2–0.3 tonnes of 20–40 mm drainage gravel backfill per square metre. One 24–27 tonne container therefore covers about 45–60 m² of finished face at that height, including backfill.

Should drainage gravel be ordered separately from wall stone?

Yes. Wall-face stone is selected for colour and stacking shape in a 100–300 mm grading, while backfill must be a 20–40 mm crushed angular gravel with fines under 5% so water drains freely behind the wall. One mixed lot produces both a patchy face and a clogged drainage layer.

Can landscape stone for retaining walls also be used for garden steps?

Yes. Slabs 100–150 mm thick with treads 300–450 mm deep and risers 100–180 mm high can be allocated from the same quarry lot as the wall boulders, keeping colour identical across both elements. Order step slabs by the piece and wall stone by the tonne on the same purchase order.

References & standards

“Over 13,000 ASTM standards operate globally. Defined and set by us, they improve the lives of millions every day. Combined with our innovative business services, they enhance performance and help everyone have confidence in the things they buy and use.”

ASTM International, “About ASTM Overview” — official page

Products Mentioned

Related Applications

Garden Landscaping

Garden landscaping brings together every stone category: ground cover for beds and borders, gravel for paths, …

Garden Pathways

Pathways combine the functional and decorative sides of landscaping stone: the surface must stay stable underf…

Commercial Landscaping

Commercial landscaping is the volume end of the stone trade: office parks, public spaces, housing developments…

Related Reading

Complete your landscape with artificial plants

Everflorae — Artificial Plants & Trees

From the same supplier group, Everflorae supplies UV-stable artificial trees, palms and green walls that pair with stone — one source for hotels, resorts, malls and Japanese gardens.

Explore Everflorae →

Request a Quote

Send your product, specification and destination — our sales team will prepare a quotation.

Request a Quote Request a Sample
WhatsApp Email Us